| Drum Closure : |
| |
|
Today
Technocraft is the second largest producer of Drum Closures
in the world with a production of 40 Million sets of
Drum Closures annually.
Our drum closures are now exported in millions to Drum Producer
in Europe, USA, Middle East & South East Asia. |
 |
|
|
| |
| Specifications
for Tite-Seal Flanges and Plugs. |
|
|
Tite-Seal
octagon flanges and round plugs meet all U.S. DOT and U.N.
standards and are completely interchangeable with other similar
brands of drum closures.
Standard Tite-Seal closures are electroplated with bright
zinc and yellow passivated against corrosion.
Unplated, Tinplated, Nickelplated and Phosphatized closures
can also be supplied upon customer request.
Tite-Seal closures are also available unplated or factory
coated with standard U.S. manufactured chemical resistant
and food grade linings to meet your exact specifications.
|
|
|
| |
|
|
Available
linings include:
Buff epoxy phenolic.
Tan phenolic epoxy.
Red phenolic.
Clear phenolic.
Green phenolic.
A variety of gaskets are available including Buna, EPDM, Polyirradrated,
Teflon and Viton. |
|
Tite-Seal
flanges can be installed with industry standard insertion
dies or with die sets which can be provided by Technocraft
Industries.
Tite-Seal closures are manufactured by Technocraft
Industries (India) Limited, an ISO 9001:2000 certified company.
|
|
|
| |
|
Click
here for gasket torque + temperature ratings and a cross
section of flange, plug and cap seal assembly. |
 |
|
 |
| |
| Specifications
for Tite-Seal Metal and Plastic Capseals. |
| |
|
Security
capseals assure maximum protection for drummed products.
Steel security capseals are made of quality tin plated stel
which is precisely formed, lined with a chemical resistant
lacquer and fitted with a heat cured vinyl gasket.
A white enamel exterior is standard and multi-color custom
litho printing is available. |
|
Plastic
security capseals are made from high quality polyethylene
plastic and can be silkscreened with custom designs specified
by our customers. |
|
|
| |
|
Manual and pneumatic
capseal crimping tools are available for fast and effective
installation.
Tite-Seal security capseals are manufactured
by Technocraft Industries (India) Limited, an ISO 9001:2000 certified
company. |
 |
|
 |
| |
| |
| Specifications
for Can seal closures. |
| |
|
TECHNOCRAFT CAN SEAL CLOSURE 63mm Standard and Anti-Glug
Fits on both Metal and Plastic tops.
Fits on a large opening of 63mm / 2-3/8" without
registry, thus allows a fast and efficient filling.
One time double tamper proof sealing.
Suits up to 5 gallon pails. |
|
Either a manual or a pneumatic crimping tool is to be used
to fix the "TECHNOCRAFT CAN SEAL CLOSURE" on a drum
top. These crimping tools supplied by TECHNOCRAFT are
common for metal drum tops and plastic drum tops.
|
|
|
|
 |
| |
| Specifications
for Tite-Seal Gaskets. |
| |
|
Gaskets
for Tite-Seal are available in Buna, EPDM, Polyirradiated,
Teflon, Viton and Neoprene. Gaskets for Leak Lock plugs are
available in Buna Gaskets for Tite-Seal closures are manufactured
by Technocraft Industries (India) Limited, an ISO 9001:2000 certified
company. |
 |
|
 |
| |
| |
| Specifications
for IBC Valve and Top Cap. |
| |
| |
Features :-
Specification :-
|
|
Size |
: |
DN50 |
|
Length Of Valve |
: |
128 mm |
|
Torque |
: |
60 Nm |
|
Intel Thread |
: |
S75 X 6 |
|
Outlet Thread |
: |
S60 X 6 |
|
|
|
|
Specification :-
Size
: DN150
Torque
: up to 125 Nm
|
 |
|
 |
| |
| Specifications
for Leak Lock System. |
| |
|
The
Leak Lock system is a two piece system which is used when
the octagon flange gasket has been incinerated during the
burning operation of the reconditioning process.
This plug replaces the traditional three
piece system that uses a gasket, retaining ring, and hexagon
plug.
The Leak Lock system alleviates the problem of alignment,
therefore saving you time and assuring your customer a quality
seal. This system is the simplest and most effective on the
market to prevent flange leakage due to drum incineration.
|
|
Leak
Lock reconditioning closures are manufactured by Technocraft
Industries (India) Limited, an ISO 9001:2000 certified company. |
 |
|
 |
| |
| Tite-Seal S-insertion
of Octagon Base Drum Flanges. |
| |
Technocraft Industries
announces the innovative Tite-Seal Brand S-Insertion of Octagon
Base flanges. This new method of inserting flanges into drums provides
the most secure closure available on the market today.
Technocraft Industries, with
almost 30 years'experience producing drum closures, is a world leader
in the drum closure industry. Through its advanced R&D efforts,
the company has developed the new S-insertion method of installing
flanges into steel drums.
The S-insertion method starts
with the standard process of punching and forming the pocket for
the flange and then installing it into the drum. The patented advancement
that the S-insertion provides is the crimping of the pocket around
the flange. This crimping operation pushes the metal at the bottom
of the pocket under the flange, thus locking the flange into the
pocket.
With normal insertions, in
drop tests where the head of the drum falls flat on the ground,
the flange is pushed out of the pocket. Leakage of the closures
results. With our new S-Insertion method, perpendicular flat drop
tests do not result in flanges jarred from the pocket. |
| |
The
advantages of this innovative flange insertion method are:
|
|
To insure the safest, securest
package available today, please consider specifying our S-insertion
flange for your steel drum requirements. |
| |
|
|
Diagrams
of impact results on regular and S-insertion flanges. |
|
 |
|
| |
| Auto-Seal
Closure System. |
| |
The Technocraft family
consist of more 1500 skilled workmen, technicians and technologists
all working towards the common goal of giving the best quality product
to it's customers, all over the world. |
| |
| Our Auto-Seal Closure System can be customized
to perform automatically any or all of the following functions: |
| |
|
Remove plugs from drums prior
to filling. |
|
Purge drums with cool, dry air or an inert
gas. |
|
Apply a nitrogen blanket to the drum after
filling. |
|
Automatically install the plugs into the
drum. |
|
Precisely tighten the plugs to the required
torque. |
|
Automatically apply and crimp the cap
seals. |
|
| |
Our Auto Seal System can
perform all of the above functions automatically, thus reducing
manpower requirements significantly. More importantly, when hazardous
materials are being packaged, utilizing our Auto Seal System eliminates
the dangers to personnel who would normally be in close proximity
to the packaging operation. |
 |
|
| |
| Dies. |
| |
| We have a wide range of options for Flange Insertion
Dies: |
| |
|
Individual manual dies consisting
of 4 dies for 2" and 3/4" 1st operation and 2nd operation.
|
|
Tandem Die consisting of 2 sets to do
1st operation and 2nd operation simultaneously for 2" and
3/4" Flanges. |
|
Single Operation Tandem Die capable of
doing 2" and 3/4“ 1st operation and 2nd operation in one
stroke. |
|
| |
We can also customize the
dies for automatic feeding, inspection devices or any other specific
requirements of customer. |
| |
 |
 |
|
| Clamps |
| |
| |
|
All
clamps are electrozinc plated. Different types of lugs and
bolts and nuts is also available. Technocraft produces and
supplies any special design clamp suitable for projection,
spot welding or reveting.
(We make about 100 types of Clamps)
|
|
Leak
Lock reconditioning closures are manufactured by Technocraft
Industries (India) Limited, an ISO 9001:2000 certified company. |
 |
|
 |
| |
| |
| |
| |
| |